What's new in WANPIPE 3.5.27
Jun 23, 2012
- This version added W400 GSM support for Asterisk/Dahdi and FreeSWITCH/FreeTDM. Support was provided for the B610 FXS, B610 Single FXS board, B500 4 port BRI board, Dahdi 2.6, and Linux 3.2.6. Numerous bugs were fixed.
New in WANPIPE 3.5.24 (Jan 12, 2012)
- This version adds an MTP1 msu/lssu filter option, LINEAR mapping of A108 ports for use with T3Mux, HW Echo Cancellation Clock failover, and Global Poll IRQ mode for efficient high density HDLC TX/RX.
- It has been updated to Linux 2.6.39 and 3.0.1.
- There are numerous bugfixes.
New in WANPIPE 3.5.19 (Mar 21, 2011)
- Fixed scripts for Ubuntu
- TDM API updated Tone Event API to include tone type DTMF, FAX_1100, FAX_2100, FAX_2100_WSPR
- Fixes for latest 2.6.36 linux kernel
- Fixes for TTY Driver for 2.6.32 linux kernel
- BRI default idle set to 0xFF so it does not interfere with multi-port mode.
- BRI NT & TE activation/deactivation logic update.
- Dahdi Yellow alarm reporting fix
- Wanpipe driver did not report yellow alarms properly to dahdi
- T1 Automatic AIS on LOS option now optional Previoulsy the T1 code enabled automatic AIS on LOS by default.
- This is now an option TE_AIS_AUTO_ON_LOS=YES|NO
- Default behaviour is to send Yellow alarm on link down.
- Fixed a TE1 startup race condition bug.
- It was possible for T1/E1 interrupt to occour before configuration was completel
- Fixed wanpipe.spec for dahdi RPM build
- Added serial clock recovery feature
New in WANPIPE 3.3.15 (Dec 23, 2008)
- This release adds support for B600 Analog Card, task stop function on shutdown, X21 support, an option to run Zaptel & TDM API on the same span, and the XMTP2 API for old PMC T1/E1 cards.
- It fixes the TTY driver for Linux kernel 2.6.26 and greater, tristate mode using wanpipemon, yellow alarm handler on T1/E1, E3 support for A301 cards, Serial AFT card events, and the Channel Bank ring problem on AFT T1/E1 cards.
- It updates AFT Core to fix XMTP2 startup with 16E1 links.
New in WANPIPE 3.3.14 (Nov 6, 2008)
- The TDM API has been updated to fix FreeSwitch analog support.
- Support has been added for analog TDM API TAPPING mode and Zaptel/DAHDI operation mode.
- An MTP2 option has been added to LibSS7.
- The TDM API has been updated for A200 to fix issues with FreeSwitch OpenZAP with TDM API for Analog.
- There is a minor bugfix in the XMTP2 API. The T1/E1 Loopback commands have been updated for the wanpipemon utility.
- Linux 2.6.25 and 2.6.26 support is fixed.
- The AFT driver has been updated to implement a new loopback command.
- Asterisk DAHDI support has been added.
- A possible race condition has been fixed in the A200/A400 Analog driver.
New in WANPIPE 3.3.12 (Sep 9, 2008)
- Compilation fix for 2.6.25 kernel introduced in 3.3.11 release.
- Setup update: added bri and zaptel installation modes: ./Setup install (general installation), ./Setup zaptel (zaptel based installation), ./Setup bri (SMG BRI installation).
- Streamlined Setup installation script; added check for asterisk directory when installing BRI Added check for x86 in architecture
- Fixed Makefile build
- Updated README File
New in WANPIPE 3.3.10 (Sep 9, 2008)
- This release fixed segfault issues under GCC and added the ability to disable the BRI clock reference and support for show_spans and show_calls, multiple MSNs, and timer_t3 and timer_t302.
- The Maxim T1 Rx Level now defaults to 36dB and E1 Rx Level to 42dB.
- Minor updates were made to BRIs to better conform to the TBR3 Certification.
- Startup BRI hwec configuration issues were fixed.
- Support for Linux 2.6.24 was added along with a TBR21 operation mode, MPAPI X25 support for AFT A144/A142 cards, Wireshark support, support for newer clocks, and assorted minor bugfixes.
New in WANPIPE 3.2.7.1 (Sep 7, 2008)
- The Excessive Error check that disabled the port has been removed.
- Support for new PLX2 and TUNDRA PCIe chips has been added.