Softpedia >Linux >System >Networking >KVpnc >  Changelog

KVpnc Changelog

What's new in KVpnc 0.9.6a

Dec 27, 2013
  • This release fixes only the installation of ping_check.sh at KDE4 version.

New in KVpnc 0.9.6 (Mar 9, 2010)

  • This release fixes a critical bug in KDE4 version and some other bugs. It also adds some new features.
  • Bugfixes:
  • if no profile was imported at kvpnc profile import keep profile name at profile selector fixed
  • remote id toggle at newprofilewizard at *swan use fixed
  • remote id options at newprofilewizard at *swan use fixed
  • local id options at newprofilewizard at *swan use fixed
  • split specific options at preferencesdialog in multiple tabs (*swan, racoon, pptp, openvpn) for reducing preferencesdialog size (kde3: #13610, kde4: #219556)
  • vpnc config options if ca cert or ca dir empty for use hybrid mode fixed (thanks to Todd Kennedy)
  • enable psk options at hybrid mode fixed (vpnc)
  • selecting profile selects not right profile fixed [kde4]
  • openvpn specific options toggle fixed [kde4]
  • crash at p12 certificate import fixed [kde4]
  • p12 import at openvpn profile import fixed [kde4]
  • crash at generate openvpn key fixed (#224507) [kde4]
  • remote network netmask at newprofilewizard at *swan use fixed [kde4]
  • use udp label text at newprofilewizard at *swan use fixed [kde4]
  • Features:
  • check if profile already exists at kvpnc profile import added
  • toggle all/none profiles at kvpnc profile import added
  • user defined import prefix at kvpnc profile import added
  • kde4 translation updated

New in KVpnc 0.9.5 (Mar 3, 2010)

  • use nat fixed (vpnc)
  • vpnc config option for use hybrid mode fixed
  • hide useless cisco cert comboboxes if not needed
  • use nat at pcf import fixed
  • cancel at pcf import if profile name already exists fixed
  • parameter at log message fixed (openvpn)
  • bool options fixed at kvpnc profile import
  • wrong label (before disconnect) in preferencesdialog fixed [kde4]
  • HTTP Proxy Authtype at kvpnc profile export fixed
  • auth type at kvpnc profile export fixed
  • hide ipsec virtual ip options at newprofilewizard (openvpn)
  • crash at connecting fixed (openvpn)
  • keeping existing nameserver fixed (openvpn)
  • memleak fix (vpnc)
  • vpnc start fix [kde4]
  • some vpnc kill fixes
  • fixes regarding indexes of comboboxes in preferencesdialog [kde4]
  • displaying auth type at change in preferencesdialog
  • authtype display at profile change fixed
  • display add/remove additional network routes fixed
  • use default interface at add/remove additional network routes if no device is given
  • hybrid mode at preferencesdialog fixed (vpnc)
  • save CertPath at preferencesdialog fixed (racoon)
  • if profile name with spaces is entered at newprofilewizard dont continue fixed
  • use nat preselection at newprofilewizard fixed
  • udp port toggle at newprofilewizard fixed
  • default route combobox at newprofilewizard fixed [kde4]
  • index fixes at newprofilewizard [kde4]
  • crash at connecting state fixed (openvpn)
  • save username if username/password from authdialog is requested save is checked (openvpn)
  • dont display authdialog if userdata already collected (openvpn)
  • memleak fix (openvpn)
  • crash at newprofilewizard at ssh type on tunnel type change fixed
  • use cisco icon instead pcf icon in for pcf menu entry
  • kde4 translation updated

New in KVpnc 0.9.4 (Mar 1, 2010)

  • Bugfixes:
  • rsa key auth at ipsec config file import fixed
  • rsa key auth for psk fixed (*swan)
  • psk at ipsec config file import fixed
  • connect success status message at *swan fixed
  • cert path within inline cert at openvpn config file import fixed
  • possible crash at displaying dock tooltip at disconnected state fixed
  • displaying *swan import entry in profile menu fixed
  • ipsec config file import fixes
  • crash at disconnect in connecting state fixed (racoon)
  • cancel at fritzbox vpn user config file import fixed
  • removing virtual ip address at disconnect on connecting state fixed (racoon)
  • adding virtual ip at connecting state fixed (racoon)
  • http proxy widget at preferencesdialog fixed
  • crash at connecting fixed (*swan)
  • virtual ip fixes (*swan)
  • phase 2 quickmode detecion fixed (*swan)
  • make gui not freezing if module loading/unloading
  • (rare) race condition on ipsec start fixed
  • psk mode at l2tp fixed (*swan)
  • debug level for racoon fixed
  • auth type on authtype change at preferencesdialog fixed
  • remoteid type fixed if empty
  • temporary static klips debug removed
  • toggle of remoteid type fixed if none
  • rightsourceip at *swan fixed
  • crash at connect (rare cases) fixed
  • psk auth type fixed on loading profiles
  • racoon debug level at preferencesdialog fixed
  • dh group at racoon fixed
  • export date at kvpnc profile export fixed
  • nat option fixes
  • xauth at ipsec fixed if strongSwan is used and psk is in file
  • psk on ipsec fixed if openswan is used
  • ipsec flavour parsing fixed
  • changing auth type fixed
  • selector tooltip fixes
  • mru checkbox in profile settings fixed
  • pptp auth options fixed
  • handle reject auth at ssh fixed
  • check existing profile name at new profile creation fixed
  • crash after delete profile fixed
  • crash after delete last profile from preferencesdialog fixed
  • creating new profile saved with old data when called from preferencesdialog fixed
  • hang at vpnc connect fixed
  • lineend at some vpnc debug messages fixed
  • pptp crash fixes
  • openvpn config option fixes
  • openvpn version checking for script security parameter fixed
  • saving changed profile settings after autofix fixed
  • crash on connect via openvpn fixed
  • reconnect on connection lost at pptp fixed
  • private key password use toggle fixed at importcertifcate dialog
  • local id at profile creation (racoon) in newprofilewizard fixed
  • certificate import button on certificate profile page fixed
  • crash at disconnect on connecting state fixed (openvpn)
  • crash at disconnect on connecting state fixed (pptp)
  • resolv.conf restore after disconnect if no resolvconf installed fixed
  • connect success event display fixed [kde4]
  • dock tooltip fixed at disconnected state [kde4]
  • add virtual ip at connecting state fixed (racoon) [kde4]
  • connect status alignment in statusbar fixed [kde4]
  • sorting order at toolsinfodialog fixed [kde4]
  • initial size at toolsinfdialog fixed [kde4]
  • sorting order at vpntypesinfodialog fixed [kde4]
  • initial size at ciscocertificateenrollmentdialog fixed [kde4]
  • endless loop at killing pptp fixed [kde4]
  • help for esp parameter at *swan options fixed [kde4]
  • memory leak at module loading/unloading fixed [kde4]
  • sorting at comboboxes fixed [kde4]
  • leftsourceip at virtual ip options fixed [kde4]
  • rightsourceip at virtual ip options fixed [kde4]
  • auto reconnect on disconnect fixed (pptp) [kde4]
  • saving state of ping check checkbox fixed [kde4]
  • typo fixes [kde4]
  • fixes regarding kwallet [kde4]
  • displaying empty pages fixed (#221506) [kde4]
  • crash at connecting at ssh vpn fixed [kde4]
  • save only one profile fixed [kde4]
  • disconnect ssh slots on disconnect fixed [kde4]
  • kwallet fixes [kde4]
  • error handling at certificate import fixed [kde4]
  • crash after delete last profile from preferencesdialog fixed (#221635) [kde4]
  • creating new profile saved with old data when called from preferencesdialog fixed (#210448) [kde4]
  • translation parameter fixes [kde4]
  • crash at lost connect fixed (pptp) (#208065) [kde4]
  • crash at disconnect on connecting state fixed (pptp) (#207786) [kde4]
  • resolv.conf restore after disconnect if no resolvconf installed fixed (#206211) [kde4]
  • up/down scripts removed at openvpn config file export
  • local id at psk on *swan fixed
  • using /etc/init.d/ipsec stop for stopping openswan because ipsec setup stop doesnt cleanup all
  • local/remote id types fixed (racoon)
  • hybrid detection display in toolsinfo dialog fixed
  • hybrid mode at preferencesdialog fixed (vpnc, vpnclient) [kde4]
  • Features:
  • save only new profiles at ipsec config file import
  • ipsec error handling improved
  • support for inline certificates (user certificate, ca certificate, private key, tls-key) at openvpn config file import added (see doc/README.OPENVPN_INLINE_CERT)
  • importing username by special line at openvpn config file import added (# OVPN_ACCESS_SERVER_USERNAME=)
  • hide ipsec related settings at virtualip options page if not nessary
  • cpu usage reduced
  • dock tooltip better formatted
  • eventsrc updated
  • stop connecting if hostname could not resolved at racoon profile
  • displaying virtual ip address in tooltip added (*swan, racoon)
  • dhgroup for esp added (*swan)
  • filter for fritzbox vpn user config file changed to "vpnuser_*.cfg"
  • dont use "VPN connexion established" as successful connect at racoon
  • useless netmask removed at setkey rules
  • temporary static rightid removed at *swan
  • useless http proxy options on racoon usage disabled
  • user options on racoon usage disabled if not xauth or l2tp
  • dottedIpv4Netmask2NetmaskBytes function at utils added
  • fritzbox vpn user config file import added
  • set text instead item number for auth type at preferencesdialog
  • save single profile at additionally to config sync
  • racoon virtual ip support added (use LeftSourceIP)
  • debug options for pluto and klips added (*swan)
  • remote id moved from cert options to ipsec/racoon options
  • checking gre support at pptp added
  • load ip_gre module if nessary at pptp
  • code cleanup
  • display profile info in profile selector tooltip added
  • not useable mppe and ppp options now disabled at l2tpd profile
  • l2tp auth at profile selector tooltip for l2tp profiles added
  • save only current profile instead of all if passwords got from dialog during connecting
  • messagebox for user added if connection was refused at pptp connect try
  • use KProcess instead QProcess in some cases at utils
  • tun device check more reliable made
  • allow hostname instead of ip address in ping check too
  • ciscouserca type at importcertifcate dialog added (user + ca certificate)
  • certificate will now imported into cisco cert store if set in config file
  • use cisco cert store option at certificate settings at orig cisco usage added
  • importing a pcf file containing certificate will now import the certificate too (file/cert store is selected by CertStore option in pcf file)
  • certificate select dialog now show also certs with der extension
  • hybrid support detection at vpnc added (openssl support compiled in)
  • hybrid mode (ca cert and name/password) added (vpnc, vpnclient)
  • ca certificate import at importcertifcate dialog added
  • use nat option added (split use udp into use udp and use nat for more flexibility)
  • process only events if needed at getting certs from Cisco cert store
  • debug output for replacing defaultroute added (vpnc)
  • display other informal msg from ipsec helper too [kde4]
  • read only first ip address from interface at getInterfaceIP [kde4]
  • clear text password from config file removed (workaround found) [kde4]
  • add userpage at pcf import on new profilewizward disabled [kde4]
  • set default network protocol to tcp at openvpn profile import
  • use file select dialog instead of textinput dialog for getting filename at openvpn config file export
  • id type tooltips at remote/local id comboboxes added
  • netstat toolinfo display added
  • certificate prefix can now specified at openvpn type

New in KVpnc 0.9.3 (Sep 3, 2009)

  • This release has several bugfixes and a few feature enhancements.

New in KVpnc 0.9.2 (Aug 1, 2009)

  • Bugfixes:
  • crash on exec cmd after disconnect fixed
  • path to tail after change in profilemanger fixed
  • save modified path of tail, ciscocertmgr fixed
  • deleting profile fixed [kde4]
  • crash at smartcard options widget fixed [kde4]
  • selector on authentication page fixed [kde4]
  • gui freeze eleminations [kde4]
  • username display on status fixed (openvpn) [kde4]
  • use remote network changing on profilenetworkgeneraloptions fixed [kde4]
  • replace custom bug report entry with homepage call entry [kde4]
  • profiletype on profilemanger fixed [kde4]
  • interface detection fixed [kde4]
  • racoon specific page moved to connection specific in profilemanger [kde4]
  • restoring last profile fixed [kde4]
  • echo mode on import certificate dialog fixed [kde4]
  • echo mode on psk options dialog fixed [kde4]
  • echo mode on cisco manually dialog fixed [kde4]
  • manageciscocert dialog fixed [kde4]
  • read profile data fixed (pcf file) [kde4]
  • crash on openening profilemanger fixed [kde4]
  • wrong profile name on pcf import fixed if name still exists
  • fixes regarding dns update
  • saving cisco nat mode fixed
  • ipsec setup fix
  • rename to empty name fixed
  • memory leak fixes
  • vpn type in import/export fixed
  • vtun path on preferences dialog fixed
  • ssh path on preferences dialog fixed
  • script-security option fixed (openvpn) thanks to Thomas Bartschies
  • mtu/mru options at preferences dialog fixed (openvpn) thanks to Thomas Bartschies
  • dns update fixed (openvpn) thanks to Thomas Bartschies
  • TlsRemoteHostCheckBox fixed
  • renegsec option fixed (openvpn)
  • Features:
  • ask user password on each connect option added
  • $HOME/bin now in search path of default paths
  • default paths search order changed
  • useless comment on tail info removed
  • DNS_UPDATE option renamed to Update DNS configuration, if not checked, /etc/resolv.conf will not changed
  • ping_check.sh now useable with ash
  • ping_check.sh device parameter added
  • connection status check now uses tunnel device
  • translation update
  • empty patch checking on load/save added
  • detecting pkcs11 ids for openvpn via openvpn added
  • option for selecting open profilemanger after import added
  • pkcs11 parameters changed for openvpn >= 2.1rc-9
  • openvpn version detection improved
  • pkcs11 token support for other than etoken added
  • dns domain added for pptp
  • kde3 type in version added

New in KVpnc 0.9.1 (Dec 21, 2008)

  • This release fixes a lot of bugs and adds a lot of new features.
  • It has been ported to KDE4 (KDE3 development will continue).
  • It has OpenSSH support, openl2tp support, a VPN types info dialog (shows if all is available for a specific VPN), XAUTH support (racoon and IPSec), Mode Config support for racoon, and support for OpenVPN > 2.1rc.
  • Support for racoon, IPSec (Openswan and strongSwan), and PPTP has improved.
  • The preferences dialog now does automatic saving.