websnarf 1.04

websnarf is a HTTP port listener and capture daemon.
websnarf is a HTTP port listener and capture daemon.

This is a web request listener for those curious about exploring the spread of the Code Web worm (and potentially others). It listens on port 80 like a web server does, logs each request, and closes the connection to the remote.

Code Red attempts to infect systems randomly, and those that wish to monitor this activity often use an IDS system to do so. This works only when there are real web servers on the network, because attempts to nonexistant web servers yield only unanswered ARP requests or unanswered SYN connection attempts. In order to detect actual probes by Code Red (or the Next Big Worm), one has to simulate a real web server. This program is for that purpose. It is not a security tool and is useful only to the curious.

Websnarf is a perl program that listens on port 80 and accepts all connection requests. It notes the local and remote IP addresses, waits a short time for the request (GET, POST, whatever), and closes the connection. Then the connection attempt is logged and the whole process repeats. We've managed to collect a fair amount of data with this tool so far.

Setting it up

On a UNIX system this program must be run as root in order to bind to port 80 for accepting requests: this is a traditional requirement of all listener ports less than 1024. It also won't work properly if other programs are listening on port 80: it does not work and play well with other web servers on the same box, though it's likely possible to modify it to listen only on specified interfaces.

When running, the program appends to the logfile, so it can be run multiple times without smashing the previous contents. Time is always recorded in GMT because this simplifies the time display code. The "regular" logfile format records everything we know about the request (except headers past the first), and a sample looks like this (we've truncated the right-hand part of the log so it doesn't overflow too badly).

# ./websnarf --log=logfile.txt
websnarf v1.03 listening on port 80 (timeout=5 secs)
08/02 00:33:14 210.65.143.76 -> 64.170.162.114 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:33:17 211.196.200.39 -> 64.170.162.108 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:33:43 63.197.174.141 -> 64.170.162.117 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:34:03 24.218.84.239 -> 64.170.162.113 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:35:26 170.142.149.38 -> 64.170.162.123 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:37:18 211.219.20.116 -> 64.170.162.105 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:41:57 208.142.130.50 -> 64.170.162.114 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:41:59 61.218.64.222 -> 64.170.162.119 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:43:01 63.251.210.99 -> 64.170.162.124 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:47:27 63.201.31.154 -> 64.170.162.108 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:48:07 211.248.32.87 -> 64.170.162.117 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:49:33 63.20.67.53 -> 64.170.162.114 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:50:08 61.157.91.164 -> 64.170.162.116 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}
08/02 00:52:17 200.194.106.6 -> 64.170.162.104 : {GET /default.ida?NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN}


Logs can also be written in Apache format with the --apache command-line parameter, and this is to allow easy submission of Code Red logfiles to some of the centralized logging sites like DShield.org (who can apparently accept Apache logs via email). An Apache logfile output looks like this wrapped for ease of presentation here):

# ./websnarf --log=logfile.txt --apache
203.250.143.83 - - [02/Aug/2001:15:15:34 -0000] "GET /default.ida?NNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
NNNNNNNNNNNNNN%u9090%u6858%ucbd3%u7801%u9090%u6858%ucbd3%u7801%u9090%
u6858%ucbd3%u7801%u9090%u9090%u8190%u00c3%u0003%u8b00%u531b%u53ff%u00
78%u0000%u00=a HTTP/1.0" 404 10
0

Note that Apache logfiles do not record the destination IP address, so this information is lost. We might find a way to override one of the otherwise-unused fields (auth?) to provide this anyway. It's the lack of the destination IP that make --apache not be the default.

Listening on multiple IP addresses

For machines on a network that can listen on multiple interfaces, this can increase the amount of information reported. Under Red Hat Linux (and probably many others), we can use the ifconfig command to add aliases to the existing Ethernet driver, allowing it to listen on more than one.

For instance, assuming the Ethernet interface is eth0, aliases can be added as root with

# ifconfig eth0:0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255
# ifconfig eth0:1 192.168.1.3 netmask 255.255.255.0 broadcast 192.168.1.255
# ifconfig eth0:2 192.168.1.4 netmask 255.255.255.0 broadcast 192.168.1.255
# ifconfig eth0:3 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255
# ifconfig eth0:4 192.168.1.6 netmask 255.255.255.0 broadcast 192.168.1.255
# ifconfig eth0:5 192.168.1.7 netmask 255.255.255.0 broadcast 192.168.1.255
# ifconfig eth0:6 192.168.1.8 netmask 255.255.255.0 broadcast 192.168.1.255
...


We're not aware of specific limits on how many IP addresses one machine can listen on, but we'd be surprised if there were none.

Update: previous versions of this document omitted the suggested netmask and broadcast keywords from the ifconfig command. If your netmask is nonstandard, you'll probably need them.

It should go without saying that any external firewalls have to permit the inbound traffic to the local machine's port 80 in order for them to be logged here. Open up external firewalls at your own risk.

What's New in This Release:

just changed the comments to no longer discourage --save. No changes to the perl code

last updated on:
June 15th, 2008, 16:32 GMT
price:
FREE!
developed by:
Steve Friedl
homepage:
www.unixwiz.net
license type:
GPL (GNU General Public License) 
category:
ROOT \ System \ Networking

FREE!

In a hurry? Add it to your Download Basket!

user rating 14

2.3/5
 

0/5

Rate it!
1 Screenshot
websnarf

Add your review!

SUBMIT