Array-util 1.0

Array-util is a small tool to get some information from a SmartArray controller.

  Add it to your Download Basket!

 Add it to your Watch List!

0/5

Rate it!
send us
an update
LICENSE TYPE:
GPL (GNU General Public License) 
USER RATING:
2.5/5 15
DEVELOPED BY:
Hugo Trippaers
HOMEPAGE:
www.strocamp.net
CATEGORY:
ROOT \ System \ Monitoring
Array-util project was tested on: It gives you an overview of all logical and physical drives, including basic information on sizes etc. It is supposed to become a configuration tool in the future. Note that it only works with SmartArray driver version 1.0.1+

Array-util project was tested on:

· Compaq Proliant 2500 with SmartArray 2DH
· Compaq Proliant 1600 with SmartArray 2DH
· Compaq Proliant ML350 with an additional Smart Array 431-Controller (thanks to Christian Bauer)
· Compaq Proliant DL380 with Internal SmartArray controller (thanks to Jason Sturgeon)
· Compaq Proliant ML370 with Integrated SmartArray (thanks to Brian Rossmeisl)
· Compaq Proliant 5500 with a SmartArray 3200 (thanks to Andrew A. Neuschwander)
· Compaq Proliant 1850R with a SmartArray 3200 (thanks to Brian Towles)
· Compaq Proliant 6400R with a SmartArray 3200 (thanks to Brian Towles)
· Compaq Proliant 3000 with a SmartArray 3200 (thanks to Brian Towles)
· Compaq Proliant DL580 with two SmartArray 4200 (thanks to Dietmar Stein)

Known bugs:

Array-util: Blinking is not working on a DL380.
Array-util: Hotspares are not listed in array-util.
Array-util: There is no progess indicator of the rebuild process.

Requirements:

· You need to have the SmartArray patch installed.

Last updated on June 26th, 2007

requirements

#physical drives monitoring #logical drives monitoring #harddisk monitoring #Array-util #physical #logical #drives

Add your review!

SUBMIT