xboxproxy 2.1

xboxproxy allows users to bridge two networks forwarding only certain kinds of traffic.
In an effort to be able to play Halo 2 with some out of state friends, I wrote an xbox system link proxy that would essentially bridge only xbox network traffic across across layer 3 networks using UDP.

Written in C and uses libpcap and libnet. A later update added multicast support so Apple's Rendezvous (mdns) protocol could span subnets and networks.

xboxproxy project a very simple program that simple takes certain packets and forwards them to other known xbox proxies.

The xbox system link bridge will let you essentially bridge the broadcast and multicast traffic across multiple networks using these proxy bridge-points.

The xbox system link uses ethernet addresses (Layer 2) to indicate destination address and UDP (Layer 4) to send data. If you aren't familiar with the OSI model, then the layer information won't help you here. Basically, the 3 layers we care about for this system link proxy are ethernet (layer 2) and udp (layer 4). There's a special mention for the ip layer (layer 3) but that will be explained shortly.

System link packets come in two flavors: broadcast and unicast. In Halo 2, when you go to look for system link games, your xbox will send ethernet broadcast packets probing for available games.

Broadcast packets are received by every network device on your layer 2 segment, this usually means your subnet or immediate network. Other xbox systems who are hosting games will respond directly to your xbox using your xbox's ethernet address (MAC address) as the destination.

This process is called "discovery." After the discovery process completes and your xbox knows about other xboxes hosting games on the network, it begins direct communication to the known xboxes. When you try to join a game, your xbox sends packets directly to the other xbox you are connecting to. Direct communication continues until you quit the game.

A special note needs to be made, becuase you can't simple skip over layer 3 (the ip layer). We know now that addressed communication uses ethernet addresses, and we also know that the payloads are inside UDP packets, but what about the IP layer?

The IP layer has addresses of its own, among other kinds of flags. Xboxes use the IP of 0.0.0.1 to communicate. This is nothing *too* special, but if you want to sniff only your xbox's traffic, then you can simply filter for that ip and you'll get it.

The proxy works by listening for broadcast packets from any xboxes on the immediate network. Any broadcast packets are forwarded to any known proxies over UDP. The proxy also keeps track of ethernet addresses by proxy. So if a packet from "my" xbox wants to talk to another xbox, the proxy will know which proxy that target xbox is on, and only forward the packet to that proxy.

This is a very simple system, and I don't have to know anything about the system link protocol beyond what the underlying layers are used for communication.
I later did some investigating into iTunes music shares. iTunes uses mdns (Apple calls it Rendezvous) for "discovery" of other iTunes music shares.

The discovery is done over a protocol called multicast. Adding mdns support to the proxy/bridge program was quite trivial, and I have tested that it does in-fact work. You can use it to listen to iTunes music shares which are not on your immediate network.

Requirements:

libpcap
libnet 1.0 or 1.1.x

What's New in This Release:

Various changes were made.

last updated on:
November 25th, 2005, 20:23 GMT
price:
FREE!
homepage:
www.csh.rit.edu
license type:
GPL (GNU General Public License) 
developed by:
Jordan Sissel
category:
ROOT \ Internet \ HTTP (WWW)
xboxproxy
Download Button

In a hurry? Add it to your Download Basket!

user rating

UNRATED
0.0/5
 

0/5

Rate it!

Add your review!

SUBMIT